Set The 'Pdf Transparency Flattening - Oce ColorWave 650 User Manual

Set the 'PDF transparency flattening'

Introduction
Transparency information in a PDF document such as blends need to be flattened before
being printed. The setting is taken into account only for PDF documents containing
transparency information.
You can choose one of following values.
• 'Quality'
Select this value if print quality is an important factor. The processing speed will slow
down and much more memory is required.
• 'Speed'
Select this value if PDF processing performance is more important that print quality.
Large and complex PDF files are processed faster and with much less memory but
with potential impact on the image quality.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the 'PDF transparency flattening'
Click 'Preferences' - 'Print job defaults'.
1.
Click 'Edit' in the 'Postscript/PDF rasterisation settings' bar or click the value of the
2.
'PDF transparency flattening' setting.
Select the correct value.
3.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
Set the 'PDF transparency flattening'
Chapter 8 - Print quality and Print productivity 345