Define The Scanner Configuration Type - Oce ColorWave 650 User Manual

Define the scanner configuration type

Define the scanner configuration type
Introduction
You must set the type of the scanner option.
How to define the scanner configuration type
Attention:
Access the Océ Express WebTools. This setting is editable for the System administrator
and the Power user.
Navigate to 'Support' - 'Update' - 'Scanner configured'.
1.
Set the value to the type of scanner that is connected to the printer.
2.
The default value is 'No scanner'. You must only change this value if your hardware
configuration changes.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
3.
254 Chapter 6 - Use the Océ TC4 scanner