#
Settings in settings group 'Preferences' - 'Scan job defaults' - 'General scan job
settings'
'Print setting for scanned images' setting (see
' on page
337)
#
Settings in settings group 'Preferences' - 'Print job defaults' - 'Layout'
'Rotation' mode (see
'Alignment' mode (see
#
Settings in settings group 'Preferences' - 'Print job defaults' - 'General (non-
postscript) rasterisation settings'
'Long plot mode' setting (see
The overview only refers to settings that you can influence in the Océ Express WebTools.
The print productivity depends on the following aspects.
•
The size and complexity of the input file.
•
The print job submission application.
•
The settings that must be set during the print job creation and submission (Orientation,
Rotation, Resizing, Print quality, Colour mode).
•
The settings in Océ Express WebTools.
Main settings that influence the print productivity
'Set the 'Rotation' mode' on page
'Set the 'Alignment' mode ' on page
'Set the 'Long plot mode' ' on page
Chapter 8 - Print quality and Print productivity
'Set the 'Print setting for scanned images'
351)
352)
347)
331