Use the scanner user panel
Introduction
Use the scanner user panel to define the job settings. You can define the job settings in
two ways.
•
Use the left softkeys and the scroll wheel.
You can use this method if you prefer a general step by step method.
•
Use the scroll wheel and scroll-wheel key only.
You can use this method if you prefer a fast method.
Note that the scanner user panel also uses icons to explain a setting. The following illus-
tration shows the scanner user panel. For more information about the keys on the scanner
user panel see
'The scanner user panel' on page 252
Use the scanner user panel
Chapter 6 - Use the Océ TC4 scanner
255