Online Services - Oce ColorWave 650 User Manual

'Online services'

Introduction
The Océ Express WebTools offers online services (from the Océ ColorWave 650 to Océ).
You can find these settings at the 'Preferences' - 'System defaults' tab under the header
'Service' and for the proxy settings at the 'Configuration' - 'Connectivity' tab under the
header 'Online Services'.
This functionality will only work in case the 'Online Services' license is active. See
your licenses' on page 414
'Online Services' has the following configuration options available for the System admin-
istrator:
• 'Configure proxy'
•
'Check connection'
Note:
Log on as a system administrator to setup a (secure internet) connection.
'Configure proxy' (applicable if proxy settings are required to get an internet
connection)
Setup the Proxy server:
1.
• 'Proxy enabled': set to true if a proxy is needed for an Internet connection
• 'Proxy hostname': enter the fully qualified hostname of the proxy server
• 'Proxy port': enter the port to use for accessing the proxy server
Setup the authentication (if needed):
2.
• 'Proxy requires authentication': set to true if authentication is required on the proxy
server
• 'Proxy authentication: user': enter the user name for proxy access
• 'Proxy authentication: password': enter the password of the user who has proxy access
• 'Proxy authentication: domain': enter the domain in which the user account resides
'Check connection'
The connection will be checked as soon as the configuration of the proxy has changed.
1.
The status of the connection can be seen in the System tab
Chapter 4 - Configure the printing system
'Online services'
'Check
113