Change The Password For Authorised Users - Oce ColorWave 650 User Manual

Change the password for authorised users

When to do
For security reasons it is advised to periodically change the password for the 3 access
modes (Key operator, System administrator, Power user) to the Océ Express WebTools.
Attention:
The operator can enable (for example after installation) the possibility for Service to reset
the passwords without reinstallation. In that case, a specific setting, accessible for Service,
becomes visible which allows resetting the passwords. If the operator did not enable this
and passwords are lost, a reinstallation is necessary.
How to change the password for authorised users
Click 'Configuration' - 'Connectivity' - 'Passwords'.
1.
Expand the 'Passwords' section.
2.
Depending on the password you want to change select 'Key operator password', 'System
3.
administrator password' or 'Power user password'. A secondary window appears.
Log in as Key operator to change the key operator password. The default key operator
4.
password is KeyOp.
Log in as System administrator to change the system administrator password. The default
system administrator password is SysAdm.
Log in as Power user to change all the passwords. The default power user password is
PowUsr.
Note:
The passwords are case sensitive. You can only use characters from the following range:
A-Z
a-z
0-9
_ - ~ ! ? @ # $ % ^ * + = , . : ; / [ ] ( ) { }
You cannot use other characters.
Enter the new password twice to confirm your input. The password is hidden.
5.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
6.
Change the password for authorised users
Chapter 4 - Configure the printing system 119