Oce ColorWave 650 User Manual page 369

Stages in the process of making a colour print
The Océ Express WebTools offers 3 default paths for colour settings,
based on the file type of the document:
• 'Colour management settings for HP-GL, HP-GL/2 and HP-RTL
files'
''Colour management settings for HP-GL, HP-GL/2 and HP-RTL files'
' on page 370
•
'Colour management settings for TIFF and JPEG files'
''Colour management settings for TIFF and JPEG files' (RGB input)'
on page 371
''Colour management settings for TIFF and JPEG files' (CMYK input)'
on page 372
• 'Color management settings for PostScript and PDF files'
''Color management settings for PostScript and PDF files' (RGB input)'
on page 373
''Color management settings for PostScript and PDF files' (CMYK input)'
on page 374
These settings are applied when the controller cannot recognise or detect
any colour settings for the file to be printed.
Note:
It is advised to align the colour management settings that have been made in the different
stages before you start the print job. The colour space of the document and the settings
for the print have to match. This means that if you have set the colour settings in more
than 1 stage of the process described above, you must check if the colour settings do not
counteract with each other.
Priorities in the colour management settings
Chapter 8 - Print quality and Print productivity
Priority
4
369