Oce ColorWave 650 User Manual page 287

Setting
'Remove strip'
'Mirror'
'Lighter/darker'
'Checkprint'
'File name'
Description
Use this setting to define blank areas on the sides of the
scanned image. ''Remove strip' ' on page 294
Use this setting to create a mirrored image of an original.
Mirroring occurs in the transport direction. (The image
is mirrored along the vertical axis.)
Use this setting to define the exposure of the original.
Negative values mean less exposure and darker scanned
output. Positive values mean more exposure and greyer
scanned output.
Note:
This setting can only be set if the colour mode
you select is grey or black and white.
Use this setting to define if the system prints a checkprint
for a scan-to-file job. The checkprint represents the
quality of the scanned document. You can make multiple
check prints with one scan.
Note:
This setting can not be used for scan-to-file jobs
with colour.
Use this setting to define a general name for a scan-to-
file job, followed by a counter. For example 'CW650-
###'.
Chapter 6 - Use the Océ TC4 scanner
Available settings for scan-to-file jobs
287