Table of Contents
Advertisement
Component
2
calibration sheet holder
3
original feeding table
4
top cover
5
original receiving table (back)
6
scanner user panel
7
thickness lever
8
thickness gauge
9
power switch
The components of the scanner (optional)
Description / Function
Feed the originals face down and right
aligned.
Covers the scan area.
Use this receiving table if you want to scan
thick or rigid originals up to 15 mm.
Normally the original receiving table (back)
is flapped down in a vertical position at the
back of the scanner.
To use this original receiving table you
must lift the table into the horizontal posi-
tion.
This receiving table can not be used in
combination with the original receiving tray
(bottom) .
You can use the scanner user panel to do
the following.
•
Select a template
•
Change the default job settings.
•
Enter the number of copies.
Use this handle to set the thickness of the
original, if you want to scan thick originals.
You can measure the thickness with the
magnetic gauge (8).
You can use the magnetic gauge in two dif-
ferent ways.
•
If the magnetic gauge is placed on the
scanner feed table you can use it to
guide the originals that you feed into
the scanner.
•
If you remove the magnetic gauge from
the scanner feed table, you can use it to
measure the thickness of an original.
Chapter 2 - Get to know the printing system
27
Hide quick links:
Advertisement
Table of Contents
