Table of Contents
Advertisement
8.17. Tare Operation
8.17.
8.17.
8.17.
The relation of the display is as follows:
Net = Gross - Tare
Key Operation
Press the TARE key.
Operation from Control I/O
1n f-xx
In
[
]
xx
03
Tare
[
]
xx is terminal number (01 to 11).
[Function] - [Set function] - [control I/O] - [Input]
Concerning Parameters
genf-9
[
]
Tare & zero unstable WGT
The prohibition of the re-zero operation in the unstable condition.
[Function] - [Set function] - [General] - [Weight]
genf-10
[
]
Tare at (-)gross weight
The prohibition of the tare operation during negative weighing.
[Function] - [Set function] - [General] - [Weight]
genf-13
Clear mode at power ON
[
]
Specify power-on status.
[Function] - [Set function] - [General] - [Weight]
8.17.1.
8.17.1.
8.17.1.
8.17.1.
Tare Clear Operation
Tare Clear Operation
Tare Clear Operation
Tare Clear Operation
The function displays a gross value that is not compensated by the tare operation or
the zero operation.
Key Operation
Step 1 Turn off the display.
Step 2 Pressing and holding the TARE key, press the ON key.
Operation from Control I/O
1n f-xx
In
[
]
xx
04
Tare clear
[
]
xx is terminal number (01 to 11).
[Function] - [Set function] - [control I/O] - [Input]
Tare Operation
Tare Operation
Tare Operation
(A
)
.................The input terminal of the control I/O.
xx
................................When it turns on, zero of net is displayed.
(A
)
.................The input terminal of the control I/O.
xx
.................When it turns on, the original gross is displayed.
Page 63
Advertisement
Chapters
Table of Contents
