Delete; Copy - AND Check Weighing Indicator AD-4404 Instruction Manual

7.2.3. 7.2.3.

Delete

Delete
7.2.3. 7.2.3. Delete Delete
This menu item can delete all or a part of the data for the code.
Step 1 Press and hold the ENTER key and press the
Code Edit
Step 2 Select
Delete
Step 3 Select
Step 4 Select menu using the
Total
Setpoint & Total
All Totals
All Codes
In case that
Step 5 Enter a code number using the numerical keys.
Press the ENTER key to delete it. Then
In case that
Step 6 Press the ENTER key to delete it. Then
Step 7 Press the ESC key several times to return to previous mode.
7.2.4. 7.2.4. 7.2.4. 7.2.4.

Copy

Copy Copy Copy
This menu item can copy all parameters of a code to another code.
Step 1 Press and hold the ENTER key and press the
Code Edit
Step 2 Select
Copy
Step 3 Select
Step 4 Enter the number of a source code using the numerical keys. Press the ENTER key.
Step 5 Enter the number of new code using the numerical keys. Press the ENTER key.
Copied Code#
Then
Step 6 Press the ESC key several times to return to previous mode.
using the
using the key. Press the ENTER key.
key. Press the ENTER key.
................................... Deletes total for a code.
............ Deletes setpoint and total for a code.
....................... Deletes total for all codes.
.......................... Deletes all codes.
Total Setpoint & Total
or
All Totals
or
using the
using the key. Press the ENTER key.
is displayed.
key. Press the ENTER key.
is selected.
Deleted
All Codes
is selected.
Deleted
key. Press the ENTER key.
Page 46
key to enter the menu.
is displayed.
is displayed.
key to enter the menu.