Preset Tare - AND Check Weighing Indicator AD-4404 Instruction Manual

7.2.5. 7.2.5. Preset

Preset Tare

7.2.5. 7.2.5. Preset Preset
This menu item can store the current tare value to preset tare (
Preset tare=0 choose
Preset the
genf-12
Preset tare=0 choose
[ ]
1
Last tare
[ ]
2
Last tare
[ ]
Step 1 Press and hold the ENTER key and press the
Code Edit
Step 2 Select
PT
Step 3 Select
Step 4 Enter the code number using the numerical keys.
Step 5 Press the ENTER key. Then
Step 6 Press the ESC key several times to return to previous mode.
Tare
Tare Tare
......... If preset tare of the recalled code is zero, the previous
tare value is used.
......... If preset tare of the recalled code is zero, the tare
value is cleared.
[Function] - [Set function] - [General] - [Basic] - [Preset tare=0 choose]
using the
(preset tare) using the
Copied tare value
genff-12
[ ].
key to enter the menu.
key. Press the ENTER key.
key. Press the ENTER key.
Page 47
PT
) of the specified code.
is displayed.