Buzzer Output; Total Function - AND Check Weighing Indicator AD-4404 Instruction Manual

8.13. Buzzer 8.13.

Buzzer Output

8.13. 8.13. Buzzer
The judgement of the buzzer output is the same as the judgement of comparison output.
The buzzer can be select six rhythms of sound. Each buzzer condition stores conditions to
sound it for LoLo, Lo, OK, Hi, HiHi, foreign matter, duplication, crush and counter limit.
Buzzer condition 1
Buzzer condition 2
Buzzer condition 3
Buzzer condition 4
Buzzer condition 5
Buzzer condition 6
The buzzer sounds for
When the BUZZER STOP key is pressed, the sound can be stopped.
Caution
The buzzer needs a power supply.
Weighing conveyor
Loadcell

8.14. Total Function

8.14. Total Function
8.14. 8.14. Total Function
The judgement can be classified and accumulated for totals of each code.
Type
Total count
NG count
OK count
Hi count
Lo count
HiHi count
LoLo count
Foreign matter count
Duplication count
Crush count
Maximum
Minimum
Average
Standard deviation
Population standard deviation
Total weight
Output
Buzzer Output Output
5q f-5
[
5q f-6
[
5q f-7
[
5q f-8
[
5q f-9
[
5q f-10]
[
preset time of
AD-4404
Total Function
Total number of all data
Count without OK data
Count of OK data
Count of Hi data
Count of Lo data
Count of HiHi data
Count of LoLo data
Count of foreign matter
Count of duplication. A detection assumes as one count.
Count of crush. A detection assumes as one count.
Maximum value of adequate data
Minimum value of adequate data
Average of adequate data
Standard deviation of adequate data
Population standard deviation of adequate data
Total weight of adequate data
] Continuous
] 0.5 Hz
] 1 Hz
] 2 Hz
] 4 Hz
8 Hz]
Buzzer ON timer
Buzzer sound can be changed
according to comparison.
Buzzer Output
Connect power supply
Description
Page 60
5q f-41].
[
P-
P-P-P-P-
P P P P P
n-1
n