Command List - AND Check Weighing Indicator AD-4404 Instruction Manual

9.2.8. 9.2.8.

Command List

Command List
9.2.8. 9.2.8. Command List Command List
Monitor Commands
Name
Read displayed value
Read gross value
Read net value
Read tare value
Read weighing result
Read setpoint
Read code data
Read total data of code
Read error code
xxxx: Code number appended to the leading zeros. Example: 0099
Write Commands
Name
Store setpoints
Store code data without total
Store all code data
xxxx: Code number appended to the leading zeros. Example: 0099
Control Commands
Name
Make zero display
Tare
Tare clear
Change to gross display
Change to net display
Call code
Cancel the last result
Start operation
Stop operation
Emergency stop
Clear total data of code
Clear total data of all code CETL
Reset an error
No operation
xxxx: Code number appended to the leading zeros. Example: 0099.
Code Description
RDSP Data specified at
RGRS
RNET
RTAR
RFIN
RSPTxxxx Comparison parameters
RCODxxxx The details of the code.
RTTLxxxx Total weight, total count
RERR
Code Description
WSPTxxxx Comparison parameters
WCODxxxx
To store all parameters of the code.
WCOXxxxx
To store all parameters of the code.
Code Description
CZER
CTAR
CCTR
CGRS
CENT
CCODxxxx
CCAC
COPR
CSTD
CSTP
CDTLxxxx Total data is set to 0.
All total data is set to 0.
CRER
CNOP
Page 82
r5 f-1
Output data
[ ]