Monitoring Built-In Current Loop Output; Monitoring A/D Converter; Monitoring Bcd Output Of Op-01; Monitoring Relay Output Of Op-02 - AND Check Weighing Indicator AD-4404 Instruction Manual

10.2.3. 10.2.3. Monitoring Built- - - - in Current L Monitoring Built
10.2.3. 10.2.3. Monitoring Built Monitoring Built
The current communication data is displayed. Output is according to Communication
Cl f-02
mode [
: CR
: LF
10.2.4. 10.2.4. 10.2.4. 10.2.4.

Monitoring A/D Converter

Monitoring A/D Converter Monitoring A/D Converter Monitoring A/D Converter
The current A/D converter data is displayed.
Internal count
10.2.5. 10.2.5. Monitoring BCD Output of OP- - - - 01 Monitoring BCD Output of OP
10.2.5. 10.2.5. Monitoring BCD Output of OP Monitoring BCD Output of OP
The current BCD output data is displayed.
0
: The inactive status to open the open collector of the output.
1
: The active status to short the open collector of the output.
The print strobe is displayed in the original logic level.
A18
Print strobe
B18
Hold input
10.2.6. 10.2.6. Monitoring Rela Monitoring Relay Output of OP
10.2.6. 10.2.6. Monitoring Rela Monitoring Rela
The status of the current relay outputs is displayed. If the rate is faster than the
Display refresh rate
0
: The inactive status to open the relay.
1
: The active status to short the relay.
Output terminal
7 ~ 10
].
C loop
Int.Count
160008
OP-01
genf-01
[
OP-02
in Current Loop Output
in Current L in Current L
123
ST,NT,+012.345kg
5nd
16 . 0 01
12345
001111000100011011
a18
001001000001010000
b18
y Output of OP- - - - 02
y Output of OP y Output of OP
] it can not be displayed.
123
0001 10100
10 7 5
Page 116
oop Output
oop Output oop Output
kg
Sent data
kg
Calibration
EN: Enable
CAL:DS
DS: Disable
01
01 01
A1
kg
B1
a1
b1
02
02 02
Output terminal
kg
1 ~ 5
1
AD-4404