8.26. Memory Backup
8.26.
8.26.
8.26.
The indicator has two kinds of memory.
Flash memory
Backup RAM
The code can be stored in flash memory or backup RAM.
Concerning Parameters
othf-8
[
]
Save data
1
[
]
Save in RAM
2
Save in flash memory
[
]
[Function] - [Set function] - [General] - [Other]
Memory Backup
Memory Backup
Memory Backup
This memory is used to store important data without power
supplied that the occurrence of re-writing them is seldom.
Life of re-writing them is approximately 100,000 times or more.
Data example: Calibration, Function, Code
This memory is used to store temporary data that the occurrence of
re-writing them is often.
Life of the battery is approximately 10 years at 25 , normal use
Data example: Tare, Total, Re-zero data
When re-writing code, the sequence is stopped.
Page 73