Address - AND Check Weighing Indicator AD-4404 Instruction Manual

9.2.7. 9.2.7.

Address

Address
9.2.7. 9.2.7. Address Address
Set the address at
between 1 and 99.
32 units can be connected to a computer. Use multiple drop connection.
[r5 f- 8] is always appended to the data in all modes of
Address
[r5 f- 2] .
mode
An address of three figures can be used, when "0" is appended to front of the address.
If three figures are used, the response of the indicator becomes three figures.
Example: Address 001 to 099 can be used.
Caution
Do not assign the same address number to multiple units.
Broadcast Address
When the address @oo is used, a command is sent to all units at the same time.
Example:
Address
@ 0 1 C
Address
@ 0 0 C
Broadcast address
[r5 f- 8]. The address can be entered as a number
T A R CR LF
T A R CR LF
Page 81
Communication