Detecting Gross Value Above Zero Band; Detecting Gross Value Within Zero Band; Check To Forward The Article - AND Check Weighing Indicator AD-4404 Instruction Manual

8.5.3. 8.5.3.

Detecting Gross Value above Zero Band

Detecting Gross Value above Zero Band
8.5.3. 8.5.3. Detecting Gross Value above Zero Band Detecting Gross Value above Zero Band
Over zero band of gross
Select
Procedure:
1 The article is moved on the weighing conveyor.
2 When the gross is above the zero band, the detection has effect.
Caution
This method can not be used for high velocity and intolerable vibration of the
weighing conveyor, because it can not detect duplication of the articles or the
position of the article.
8.5.4. 8.5.4. 8.5.4. 8.5.4.

Detecting Gross Value within Zero Band

Detecting Gross Value within Zero Band Detecting Gross Value within Zero Band Detecting Gross Value within Zero Band
Zero band of gross
Select
Procedure:
1 When the gross value is within the zero band, the detection has effect.

8.6. Check to Forward the Article

8.6. Check to Forward the Article
8.6. 8.6. Check to Forward the Article Check to Forward the Article
The function is used to forward the compared article from the weighing conveyor.
OK mode
Select
Select the mode at
Procedure for this mode:
1 When the comparison has effect,
the article is forwarded from the weighing conveyor and
Conveyor stop delay timer
2 The conveyor moves, until
of the
Weighing mode
of the
5q f-29
Detector
[
Conveyor stop delay timer
Page 55
Detector
of the
5q f-29
Detector
[
5q f-1 3
[ ] [ ] to use the check.
].
5q f-59
[ ] starts.
5q f-29 3
[ ] [ ].
4
] [ ].
5q f-59
[ ] is up.