The Menu Of Code Edit; Edit; Search - AND Check Weighing Indicator AD-4404 Instruction Manual

7.2. The Menu of Code Edit

7.2. The Menu of Code Edit
7.2. 7.2. The Menu of Code Edit The Menu of Code Edit
The code can operate with the following menu of

Edit

..................................Edits full parameters of the code.

Search

Delete
Total
Setpoint & Total
All Totals
All Codes
Copy
..................................Copies all parameters of a code to another code.
PT (
Preset tare)
7.2.1. 7.2.1. 7.2.1. 7.2.1. Edit Edit Edit Edit
This menu item can edit all of the parameters of the code.
Step 1 Press and hold the ENTER key and press the
Code Edit
Step 2 Select
Step 3 Press the ENTER key to enter the menu
Step 4 Enter a code number using the numerical keys. Press the ENTER key.
Step 5 Edit each parmeter of the code using alphanumerical keys.
Press the ENTER key to enter a new parameter and proceed to the next item.
Step 6 Press the ESC key several times to return to the previous mode.
7.2.2. 7.2.2. 7.2.2. 7.2.2. Search Search Search Search
This menu item can find a blank code.
Step 1 Press and hold the ENTER key and press the
Code Edit
Step 2 Select
Serach
Step 3 Select
Step 4 Press the ENTER key. Then the code number of a blank code is displayed.
Step 5 Press the ESC key several times to return to previous mode.
.............................Finds a blank code.
.............................Deletes all data or a part of the data for the code.
...........................Deletes total for a code.
...Deletes setpoint and total for a code.
..............Deletes total for all codes.
.................Deletes all codes.
Stores the current tare value to the preset tare of the
....................
specified code.
using the
using the
using the
Code Edit
key. Press the ENTER key.
Edit
.
key. Press the ENTER key.
key. Press the ENTER key.
Page 45
.
key to enter the menu.
key to enter the menu.