Canceling Last Judgement; Clearing The Total - AND Check Weighing Indicator AD-4404 Instruction Manual

8.22. Canceling Last 8.22.
8.22. 8.22.
The function can be operated with the terminal for the control I/O, when the terminal is
specified to
The last judgement is canceled, when the terminal is active after the judgement.
8.23.

8.23. Clearing the Total

8.23. 8.23.
Key Operation
The total of the current code can be cleared with the following operation.
Step 1 Press and hold the SHIFT key and press the CLEAR TOTAL key.
Code Edit Mode
The following totals can be cleared in menu
Refer to " 7.2.3. Delete" for operation.
Total
Setpoint & Total
All Totals
All Codes
Control I/O
There are two methods to clear the totals. These functions can be operated with the
terminals of the control I/O, when the terminals are specified by the following functions.
Clear totals of code
Clear all code totals
Parallel I/O of OP-05
There are two methods to clear the totals. These functions can be operated with the
terminals of the parallel I/O, when the terminals are specified by the following functions.
Clear totals of code
Clear all code totals
Command of Serial Interface
The totals can be cleared with the following command.
CDTLxxxx
CETL

Canceling Last Judgement

Canceling Last Canceling Last
Cancel the last result
Clearing the Total Clearing the Total Clearing the Total
................................... Deletes total for a code.
............ Deletes setpoint and total for a code.
....................... Deletes total for all codes.
.......................... Deletes all codes.
Total of a specified code is cleared. xxxx is the code number
All total is cleared.
Judgement
Judgement Judgement
12
[ ].
Code edit
24
[ ].
25
[ ].
24
[ ].
25
[ ].
Page 69
.