Function List; Operation Keys - AND Check Weighing Indicator AD-4404 Instruction Manual

11.

11. Function List

11. 11. Function List Function List Function List
The function list stores parameters to control the indicator.
The parameters are stored in an item even without power supplied.
An item is classified by a category address, and is further classified by an item
number. Refer to " 11.1.2. Outline of the Function List".
The category address has a symbol for the 7-segments display.
There are two kind of the function modes to operate the function list.
Parameter settings
Referring parameters
Example of the Display Form for an Item:
Category address: [Function] - [Set function] - [General] - [Weight]
An Item
Caution
When entering
sequence is stopped.
11.1.1. 11.1.1. 11.1.1. 11.1.1.

Operation Keys

Operation Keys Operation Keys Operation Keys
To enter the function list
To select the parameter address
To change the parameter
To store it and exit the mode
(To return to weighing mode)
The mode to edit the parameter.
The mode to refer to the parameter during the sequence.
Address of the Item
genf- 1
Display refresh rate
5 times / sec
1
Set function
Category address symbol
of the function mode, the current weighing
Press and hold the ENTER key and press the
key in the weighing mode.
Function
Select the menu
the ENTER key.
The , SHIFT +
The , SHIFT +
ESC keys.
The ESC key.
Page 124
Item number
Meaning of the Item number
Meaning of the parameter
Parameter
using the
, ENTER, ESC keys.
, Alphanumerical, ENTER,
key and
AD-4404