Manual Mode - AND Check Weighing Indicator AD-4404 Instruction Manual

6.5. Manual Mode

6.5. Manual Mode
6.5. 6.5. Manual Mode Manual Mode
The manual mode is the mode that weighs the article by hand operation and does
not use a conveyor.
In the stop mode, the current weighing value and comparison display are always updated.
The comparison output and buzzer are turned off. The comparison display is turned off,
when the weighing value is within zero band.
In the operation mode, the current weighing value is updated.
The detection of the article uses the weighing value that crosses from the zero band
Detector
and
The weighing procedure is as follows:
1 The comparison display, comparison output and buzzer are turned off, when the
weighing value is within the zero band.
2 When the article is weighed, the weighing display blinks once.
Eval delay timer
3
4 The weight is judged.
5 The comparison result is output and the preset buzzer sounds.
6 The weighing value and the comparison display are held.
7 When the article is removed and the weighing value is within the zero band, the
hold display is canceled, comparison output and buzzer are canceled.
Concerning Principal Items
Address
Parameter
5q f-01
4
5q f-02
1
5q f- 6
01000000
5q f- 8
00100000
5q f-10
00010000
5q f-41
500
5q f-29
[ ] is not used.
5q f-43
[
(Including Parameter Example)
Address name
Parameter name
Weighing mode
Manual mode
Selection of comparison
3 levels with target
Buzzer condition 2
Buzzer condition 4
Buzzer condition 6
Buzzer ON timer
Press the START key
OK
and place the article.
Loadcell
Average timer
] and
Setpoints and comparison method
Target, Lo (light), Hi(heavy)
Buzzer sounds at Lo. Interval is 0.5Hz.
1: buzzer sounds, 0: no buzzer
Buzzer sounds without OK. Interval is 2Hz.
1: buzzer sounds, 0: no buzzer
Buzzer sounds at Hi. Interval is 8Hz.
1: buzzer sounds, 0: no buzzer
Range is 0.00 to 99.99 sec.
5.00 seconds
The result can be indicated
AD-4404
Page 35
5q f-44
[ ] are up.
Description