Data Format; Settings Of Parameters For Current Loop; Print Format (Process Print) - AND Check Weighing Indicator AD-4404 Instruction Manual

9.4.3. 9.4.3.

Data Format

Data Format
9.4.3. 9.4.3. Data Format Data Format
The format is the same as A&D format of the built-in RS-485.
9.4.4. 9.4.4. 9.4.4. 9.4.4.

Settings of Parameters for Current Loop

Settings of Parameters for Current Loop Settings of Parameters for Current Loop Settings of Parameters for Current Loop
Refer to the "11. Parameter List" of the function list.
[Function] - [Set function] - [Serial] - [C.loop] - [
9.4.5. 9.4.5.

Print Format (Process Print) ) ) )

Print Format (Process Print
9.4.5. 9.4.5. Print Format (Process Print Print Format (Process Print
This mode is the function to print code data with a printer connected to the indicator.
Set dump print mode in the printer.
There are six kinds of process print at [
Concerning Parameters
Cl f- 7
[ ] Process print
0
[ ] Not printed
1
Mode 1
[ ]
2
[ ] Mode 2
3
Mode 3
[ ]
4
[ ] Mode 4
5
Mode 5
[ ]
6
[ ] Mode 6
[Function] - [Set function] - [Serial] - [C.loop] - [
AD-4404
................... 22 characters in a row and CR LF can be output.
Data is printed in two lines. Name is 12 characters.
It can be used for general printer, for "24 characters in a
line" for the AD-8118A/B or other A&D printer.
................... Mode 2 is the same as mode 1 and can print each
parameter of a code.
................... Data is printed in a line. Name is 9 characters.
It can be used for the AD-8118A/B or other A&D printer.
................... Mode 4 is the same as mode 3 and can print each
parameter of a code.
................... It can be used with "16 characters in a line" of A&D printer
or for AD-8121.
................... Mode 6 is the same as mode 5 and can print each
parameter of a code.
5q f-01
] to [
Cl f- 7
].
Cl f- 7
Page 99
5q f-08
]
]