Conveyor Stop Mode - AND Check Weighing Indicator AD-4404 Instruction Manual

6.2. Conveyor Stop Mode

6.2. Conveyor Stop Mode
6.2. 6.2. Conveyor Stop Mode Conveyor Stop Mode
The conveyor stop mode is the function that the article is stopped on the weighing
conveyor for accurate measurement.
When the gross value is within zero band, the weighing value is not judged.
The mode can be used with foreign matter detection.
Caution
Set parameter of
correctly.
5q f-29 2
[ ] [
Concerning Principal Items
Address
Parameter
5q f- 1
2
5q f- 2
1
5q f-29
2
5q f- 5
11011111
5q f-21
00000110
5q f-22
11011111
5q f-42
5q f-43
5q f-44
5q f-45
0. 0 0
5q f-46
5q f-52
Leading conveyor
Position sensor
Tail Edge Tail Edge
Tail Edge Tail Edge
] [Function] - [Set Function] - [Sequence] -[Control] - [Tail Edge]
(Including Parameter Example)
Address name
Parameter name
Weighing mode
Conveyor stop mode
Selection of comparison
3 levels with target
Detector
Tail edge
Buzzer condition 1
Conveyor stop condition
Selector 1 condition
Chattering timer
Eval delay timer
Average timer
Compare Output timer
Selection out 1 delay timer
Select output 1 timer
The end of the
article is detected
Weighing conveyor
to place the article on the weighing conveyor
Setpoints and comparison method
Target, Lo (light), Hi(heavy)
Detection method
Position sensor detects the end of an article.
Buzzer sounds without OK.
1: buzzer sounds, 0: no buzzer
Conveyor stops for foreign matter or crush.
Article is separated by selector 1 without OK.
The time to ignore the position sensor.
Range is 0.00 to 99.99 sec.
The time between detecting an article and
averaging it. Range is 0.00 to 99.99 sec.
Time to average the weighing value.
Range is 0.00 to 99.99 sec.
Output pulse is turned on until next article
detection. Range is 0.00 to 99.99 sec.
Delay time of selector 6 after judgement.
Range is 0.00 to 99.99 sec.
The output time of selector 1.
Range is 0.00 to 99.99 sec.
The article is stopped and
weight is judged.
OK
Loadcell
Page 29
Description
Selector only passes OK
Selector 1
Forwarding conveyor
To light