Status And Check Weighing Sequence - AND Check Weighing Indicator AD-4404 Instruction Manual

6.7. Status and Check Weighing 6.7.

Status and Check Weighing Sequence

6.7. 6.7. Status and Check Weighing Status and Check Weighing
The status of the indicator, the display and each interface are according to the status
of the check weighing sequence.
Preset a parameter for each terminal function in the menu ControlI/O.
1n f- 1
[ ] to [
0utf- 1
[ ] to [
Principal Status List
Location and function name....................
In normal stop mode ............................
In operation mode
For automatic mode, conveyor
stop mode, OK mode.................
For manual mode and simple
mode ...........................................
In pause ................................................
Location and function name....................
In normal stop mode ............................
In operation mode ................................
In pause ................................................
Location and function name....................
In normal stop mode
For automatic mode, conveyor
stop mode ...................................
For manual mode, OK mode,
simple mode ...............................
In operation mode
For automatic mode, conveyor
stop mode ...................................
For manual mode, OK mode............
For simple mode ...............................
In pause ................................................
Location and function name....................
In normal stop mode ............................
In operation mode ................................
In pause ................................................
1n f- 11
] Function] - [Set Function] - [Control I/O] - [Input]
0ut f- 11
] Function] - [Set Function] - [Control I/O] - [Output]
Control output or output terminal
Conveyor (14)
Conveyor is stopped.
It is moving.
It is stopped.
It is stopped.
Status indicator
OPERATE
It turns off.
It turns on.
It blinks.
Status indicator and Control output
Hi, OK, Lo (Comparison result)
It turns off.
It displays result for the current weight.
It displays result.
It turns off before judgement.
It displays result after judgement.
It displays result for the current weight.
It displays result.
Status indicator
ZTR (Zero tracking)
It displays for one second, when static zero tracking
is achieved.
It displays for one second, when static or dynamic
zero tracking is achieved
It displays for one second, when static zero tracking
is achieved.
Page 39
Sequence
Sequence Sequence