AND Check Weighing Indicator AD-4404 Instruction Manual page 124

Procedure
Caution
Do not initialize parameters while in operation. Cut off the power supply of
other systems. When initializing the indicator, the output may change.
When initializing the indicator, do not turn off the indicator before it is reset.
To enter initialization
Step 1 Press and hold the ENTER key and press the
menu in a weighing mode.
Step 2 Select the menu
Select the menu
Category address: [Function] - [Set function] - [SystemMgmt] - [init]
Step 3 Select the initialization menu using the
RAM
Menu:
Yes
Step 4 Press
Step 5 Wait for the indicator to reset.
SystemMgmt
Init
using the
Code Function
, ,
to initialize them using the
key to display the
using the key, ENTER key.
key, ENTER key.
key, ENTER key.
CAL All
, or
key, ENTER key.
Page 122 AD-4404