Installation; Installing Options - AND Check Weighing Indicator AD-4404 Instruction Manual

3. 3. 3. 3. Installation

Installation Installation Installation
Installation Procedure
Remove the power cord before installing the indicator or an option.
Turn off peripheral devices before connecting them.
Insert the options before installing the indicator.
Mount the indicator to the panel.
Connect cables and wires to the indicator.
3.1.

3.1. Installing Options

3.1. 3.1. Installing Options Installing Options Installing Options
Caution
Remove the power cord before installing an optional accessories.
Do not install the same option to input data or comunication option using slots.
Do not assign the same function to multiple input terminals.
Never touch the internal parts within ten seconds after removing the power
cord because you may receive an electric shock.
Do not forget to tighten the screws. If a screw is not tightened, it may cause a
short circuit or an error due to noise.
Step 1 Remove the power cord.
Step 11 Initialize the RAM data in accordance with section "9.4. Initializing Parameters".
Page 12