Testing Rs-232C Interface Of Op-04; Testing Parallel I/O Of Op-05; Testing Analog Output Of Op-07 - AND Check Weighing Indicator AD-4404 Instruction Manual

10.3.8. 10.3.8. Testing RS- - - - 232C Interface of OP Testing RS
10.3.8. 10.3.8. Testing RS Testing RS
Each time to press the ENTER key, the test data "ST,GS,+0000000kg CR LF" is
output.
The received data is displayed, when data is output.
: CR
: LF
Parity: p
Framing: f
10.3.9. 10.3.9. 10.3.9. 10.3.9. Testing Parallel I/O of OP Testing Parallel I/O Testing Parallel I/O Testing Parallel I/O
Terminals display the current input data.
One of terminal B turns on every one second and in order. The active terminal
displays "1".
10.3.10. 10.3.10. 10.3.10. 10.3.10. Testing Analog Output of OP Testing Analog Output of OP- - - - 07 Testing Analog Output of OP Testing Analog Output of OP
When pressing the 1 key, the output current is increased.
When pressing the 2 key, the output current is decreased.
Analog output
232C Interface of OP- - - - 04
232C Interface of OP 232C Interface of OP
ST,GS,+0000000kg
0p-04 rcu and 5nd
OP-05 0000000000000000
a16
0001000000000000
b16
OP-07
20 mA
Page 120
123
kg
RNET
of OP of OP- - - - 05 of OP 05 05 05
123
kg
a1
b1
07 07 07
96 . 2 7
kg
04
04 04
Received data
Sent data
Input terminal A1
Output terminal B1
AD-4404