Tare; Preset Tare (Fixed Tare Function); Customizing The Function Key (Key Design) - AND Multi Function Weighing Indicator AD-4402 Instruction Manual

7.5.3. 7.5.3.

Tare

Tare
7.5.3. 7.5.3. Tare Tare
The relation of the display is as follows:
Net = Gross - Tare
Concerning Parameters of the Function
Prohibiting tare during unstable weighing
[genf- 9]
Prohibiting tare during negative weighing
[genf-10]
Resetting tare at turning on the indicator
[genf-13]
7.5.4. 7.5.4. 7.5.4. 7.5.4.

Preset Tare (Fixed Tare Function)

Preset Tare (Fixed Tare Function) Preset Tare (Fixed Tare Function) Preset Tare (Fixed Tare Function)
A preset tare can be stored in each material code.
Concerning Parameters of the Function
Using preset tare
[genf-11]
Using preset tare for partial material code
[genf-12]
Classifying normal tare and preset tare on the serial data
[genf-07]
7.5.5. 7.5.5. Customizing Customizing the Function Key (Key Design
7.5.5. 7.5.5. Customizing Customizing
Refer to" 2.2.1. Keys" of the front panel regarding key operation.
Refer to "10.4. Parameter List" of the function list regarding key function.
Concerning Parameters of the Function
Setting F1, F2, F3 and F4 keys
[0tHf- 2] to [0tHf- 5]
AD-4402
Tare and zero compensation at unstable status
[Function] - [Function setting] - [General] - [Weighing]
Tare at negative GROSS weight
[Function] - [Function setting] - [General] - [Weighing]
Clear mode at power ON
[Function] - [Function setting] - [General] - [Weighing]
Preset tare
[Function] - [Function setting] - [General] - [Weighing]
Preset tare=0
[Function] - [Function setting] - [General] - [Weighing]
T
are Header
[Function] - [Function setting] - [General] - [Weighing]
the Function Key (Key Design) ) ) )
the Function Key (Key Design the Function Key (Key Design
[Function] - [Function setting] - [General] - [Other]
Page 67