Output To Selectors - AND Check Weighing Indicator AD-4404 Instruction Manual

8.12.2. 8.12.2.

Output to Selectors

Output to Selectors
8.12.2. 8.12.2. Output to Selectors Output to Selectors
The output is used to control the selector using the timer.
A maximum of six selectors can be connected to the AD-4404.
Output according to conditions and timers.
Selector 1 condition
Selector 2 condition
Selector 3 condition
Selector 4 condition
Selector 5 condition
Selector 6 condition
Selector 1 condition
When the interval is short and the distance between the weighing conveyor and
selector is long, a maximum of ten judgements will be stored into memory for each
selector.
Therefore each selector can be stored ten suits of judgement, the output delay timer
and output timer. At maximum, sixty suits of data can be stored in the six selectors.
Net
0
5q f-43
Eval delay timer
5q f-44
Average timer
5q f-46
Selection out 1 delay timer
5q f-52
Select output 1 timer
5q f-46
Selection out 1 delay timer
5q f-52
Select output 1 timer
5q f-46
Selection out 1 delay timer
5q f-52
Select output 1 timer
5q f-46
Selection out 1 delay timer
5q f-52
Select output 1 timer
5q f-22
[
5q f-23
[
5q f-24
[
5q f-25
[
5q f-26
[
5q f-27
[
5q f-22
[
Judgement Judgement
]
]
]
]
]
]
]
Judgement
Page 59
Judgement