Weighing Range Function - AND Weighing Indicator AD-4406 OP03 Instruction Manual

Press and hold the ON/OFF key and press the ESC key.
Step18 Press the ON/OFF key to turn the display off.

5.3. Weighing Range Function

The weighing range function can select "single range" or "dual range". Specify each
weighing interval (division) for the multi-interval instrument. Each weighing interval is
displayed according to a net value or gross value.
Note When single range is used, performing this function is not required.
Example 1
Specified parameters:
First range
Second range
Display
0 kg to 50 kg :
50 kg to 100 kg :
division 0.02 kg
0 kg
Example 2
Specified parameters:
Display
-40 kg to 50 kg :
50 kg to 60 kg :
-40 kg
5.3. Weighing Range Function
No parameters are changed,
CAnCEL is displayed and the calibration mode is finished.
The gross display.
Range = 50.00 kg, division 0.02 kg
Range = 100.00 kg (maximum capacity), division 0.1 kg
The first range, division 0.02 kg.
The second range, division 0.1 kg.
The net display using a 40kg tare value.
The same parameters as example 1.
The first range, division 0.02 kg.
The second range, division 0.1 kg.
division 0.02 kg
0 kg
Tare value
40 kg
division
50 kg
Page 16
0.1 kg
100 kg Gross
Weighing value
division 0.1 kg
50 kg 60 kg Net
90 kg 100 kg
Weighing value
AD-4406 Weighing Indicator