Editing Principle Parameters Of A Material Code; Referring To The Next Material Code - AND Multi Function Weighing Indicator AD-4402 Instruction Manual

6.1.3. 6.1.3.

Editing Principle Parameters of a Material Code

Editing Principle Parameters of a Material Code
6.1.3. 6.1.3. Editing Principle Parameters of a Material Code Editing Principle Parameters of a Material Code
You can edit the parameters of final weight, free fall etc. displayed on the sub-display
during a weighing. Items of the sub-display can be selected at the menu [Function] -
[Function setting] - [General] - [Sub-display].
Caution
If the flash memory is selected for memory backup (0tHf
weighting is stopped while editing them.
Step 1 Press and hold the SHIFT key and press the CODE RECALL key.
Then the material code blinks.
Step 2 Enter the material code using the numerical keys
The details of the material code are displayed on the sub-display.
Step 3 Press the ENTER key to decide the code.
Step 4 Select a parameter using the
Step 5 Enter the parameter using numerical keys and press the ENTER key to store it.
Step 6 If you continue the change, proceed step 4 and 5.
Step 7 If you want to finish the change, press the ESC key several times to return to the
weighing mode.
6.1.4. 6.1.4. 6.1.4. 6.1.4. Referr Referr Referr Referring
You can refer to next material code in the sequential mode that uses multiple material
codes. Suppose that the recipe code is not used. (The menu [Function] - [Function
setting] - [Sequence] - [Basic] - [Recipe mode] is set to [5q f- 8] [0])
Step 1 Press the CODE RECALL key.
Then principle parameters of the next material code are displayed in the
sub-display.
Step 2 Press the ESC key to return to current mode.
key on the sub-display.
ing to the next Material Code ing ing to the next Material Code to the next Material Code to the next Material Code
Page 26
0tHf- - - - 11 11), the current batch
0tHf 0tHf 11 11
AD-4402