Parameter List - AND Multi Function Weighing Indicator AD-4402 Instruction Manual

10.4. Parameter List

10.4.
10.4. 10.4.
Category address: [Function] - [Function setting] - [General] - [Weighing]
Category
address
symbol
genf- 1
Display refresh rate
genf- 2
Digital filter
Sampling
genf- 3
freqeuncy divider
Stability detection
genf- 4
time
Stability detection
genf- 5
band width
genf- 6
Zero Range
genf- 7
Zero tracking time
Zero tracking band
genf- 8
width
Tare and zero
genf- 9
compensation at
unstable status
Tare at negative
genf-10
GROSS weight
genf-11
Preset tare
Preset tare =0
genf-12
choice
Parameter List
Parameter List Parameter List
Name
1: Five times per second
2: Ten times per second
0: Not used
1: 11 Hz
2: 8.0 Hz
3: 5.6 Hz
4: 4.0 Hz
5: 2.8 Hz
6: 2.0 Hz
7: 1.4 Hz
8: 1.0 Hz
9: 0.7 Hz
Use to decrease the cut-off frequency of
the digital filter.
The detection condition concerning
satblility.
0.0 : stable at anytime.
The range to zero the gross display.
Center of range is zero calibration.
Unit: percentage of weighing capacity.
The function automatically traces the
weighing deviation at nearly zero
point and keeps zero display of gross
display.
When unstable weghing, whether zero
or tare command is used.
0 :Disabled
1 :Enabled
When negative weghing, whether tare
command is used.
0 :Prohibit tare.
1 : Permission to tare.
Preset tare of material code
0 :Not used
1 :Use
1: If tare value of material code is zero,
the last tare value is used.
2: If tare value of material code is zero,
Tare is set to zero.
Descriptions
Select 3dB band for two
low pass filters.
A/D converter
First filter
Second filter
Page 108
Range
and Default
choices
1 to 2 2
0 to 99
4 8
0 to 10 1
0.0 to
1.0 s
9.9 s
0.0 to
2.0 d
9.9 d
0 to 30 % 5 %
0.0 to
0.0 s
9.9 s
0.0 to
0.0 d
9.9 d
0 to 1 1
0 to 1 1
0 to 1 1
1 to 2 1
AD-4402