AND Multi Function Weighing Indicator AD-4402 Instruction Manual page 43

Using customer programmed control for OVER signal, OK signal and UNDER signal.
[5q f- 5]
Final value (Target weight)
Final value - Free fall
Final value - Preliminary
Final value - Optional preliminary
Material code, Input
Start command, Input
Batch start delay timer
5qf-31
Batch monitoring timer
Medium flow, Output
Dribble flow, Output
5qf-33
Full flow comparison interrupt timer
5qf-34
Medium flow comparison interrupt timer
5qf-35
Dribble flow comparison interrupt timer
5qf-37
Batch finish, Output
Discharge start, Input
Discharge start delay timer
Discharge monitoring timer
Discharge, Output
Nearly zero, Output
Discharge gate close timer
Discharge finish, Output
Drawing: Normal Batching of Built-in automatic program mode
AD-4402
[Function] - [Function setting] - [Sequence] - [Basic] - [Comparison]
Displayed value
Optional preliminary
0
The active code is only read at
each start. And keep it.
1
0
5qf-32
Full flow, Output
Eval delay timer
Stable, Output
Over, Output
OK, Output
Under, Output
Preliminary
Tare
Time until supplying it
Compari s on
5qf-43
Batch finish output
on
If discharge sequence,
set the function.
Page 41
Gross weight
Net weight
Free fall
Zero band
The whole time to
supply it
According to 5qf-37 and stable.
5qf-13 can be set.
Select a mode
at 5qf-05