Function List; Operation Keys - AND Multi Function Weighing Indicator AD-4402 Instruction Manual

10.

10. Function List

10. 10. Function List Function List Function List
The function list stores parameters to control the indicator.
The parameters are stored in an item even without power supplied.
An item is classified by a category address, and is further classified by an item
number.
Refer to " 10.1.2. Outline of the Function List".
The category address has a symbol for the 7-segments display
There are two kind of the function modes to operate the function list.
Parameter settings
Referring parameters
Example of an item:
Category address: [Function] - [Function setting] - [General] - [Weighing]
Address
An Item
Caution
When entering
weighing sequence is stopped.
10.1.1. 10.1.1.

Operation Keys

Operation Keys
10.1.1. 10.1.1. Operation Keys Operation Keys
To enter the function list
To select the parameter address
To change the parameter
To store it and exit the function list
(To return to weighing mode)
AD-4402
This mode is used to change the parameter.
This mode is used to refer the parameter in the
weighing sequence.
Category address symbol
Item number
genf- 1
1
Parameter
Parameter settings
Press and hold the ENTER key and press the
key in the weighing mode.
Select the menu
the ENTER key.
The
The
ESC keys.
The ESC key.
Page 105
Display refresh rate
5 times / second
of the function mode, the current
Function
, SHIFT + , ENTER, ESC keys.
, SHIFT + , Alphanumerical, ENTER,
Meaning of the address
Meaning of the parameter
using the key and