Error Message And Alarm - AND Multi Function Weighing Indicator AD-4402 Instruction Manual

7.5.11. 7.5.11. Error Message

Error Message and Alarm

7.5.11. 7.5.11. Error Message Error Message
When the indicator detects an error in the weighing system, an error message is
displayed.
When the indicator becomes a preset condition, it is announced with the preset alarm.
Kind of error
Error message is displayed
Kind of Alarm and Error
There is the following priority.
Weighing sequence error
SQ.ERR
Kind
Weighing
sequence
error
SQ.ERR
AD-4402
Error no.
Stop key
<
No.
When the weighing can not continue, a message is displayed and the
sequence is stoped. Cope with cause and restart the weighing.
The weighing sequence stoped.
0
Cope with cause and restart the sequence.
Safety check can not be completed.
1
Check the safety.
Under weight or over weight.
2
Compensate weight and restart.
There is a conflict in setpoint
3
Check setpoint
Time over of batch weighing.
4
Check the gate and remains of hopper.
Time over of discharge.
5
Check the discharge gate.
The remains are not enough to weigh.
6
Add material.
7 When the batch is started, the weight is full already.
Nozzle is touching the hopper.
8
Check the nozzle.
9 There is no tare (vessel) on the weighing pan.
and Alarm
and Alarm and Alarm
Weighing error
SQ.ERR SQ.ERR
SQ.ERR SQ.ERR
Over or under
amount in the
result
Zero error < Alarm 1
ZR.ERR
ALARM 1
Description
Page 71
Error no.
Alarm 1
SQ.ERR SQ.ERR
SQ.ERR SQ.ERR
ALARM 1 ALARM 1 ALARM 1 ALARM 1
Out of range
Principle alarm links, when
multiple alarm is active.
< Alarm 2
ALARM 2
Error no.