Maintenance; Basic Operation; Monitor Mode; Monitoring The Control I/O Function - AND Multi Function Weighing Indicator AD-4402 Instruction Manual

9. 9. 9. 9. Maintenance

Maintenance Maintenance Maintenance
9.1.1. 9.1.1.

Basic Operation

Basic Operation
9.1.1. 9.1.1. Basic Operation Basic Operation
To enter the maintenance function
To select an address of the parameter The
To change the parameter
To exit the mode
(To return to the weighing mode)
9.2. 9.2. Mon 9.2. 9.2. Mon Mon

Monitor Mode

The monitor mode is used to check the indicator during the weighing sequence.
9.2.1. 9.2.1.

Monitoring the Control I/O Function

Monitoring the Control I/O Function
9.2.1. 9.2.1. Monitoring the Control I/O Function Monitoring the Control I/O Function
Used to monitor the status of the I/O terminals.
When [ genf- 1 ] is slow, it
may not display all data.
9.2.2. 9.2.2. 9.2.2. 9.2.2. Monitoring the Built Monitoring the Built Monitoring the Built- - - - in in in in RS Monitoring the Built
The current communication data is displayed.
Parity: p
Framing: f
Press and hold the ENTER key and press the
key in the weighing mode.
Select the menu
and the ENTER key.
The
ESC keys.
The ESC key.
itor Mode itor Mode itor Mode
CONTROL
a11
I/O
b11
RNET0099,1234567,123456789
r5-485 rcu and 5nd
Page 96
maintenance
, SHIFT + , ENTER, ESC keys.
, SHIFT + , Alphanumerical, ENTER,
123
00010001000
a1
00110100001
b1
RS- - - - 485 Interface RS RS 485 Interface 485 Interface 485 Interface
123
using the
kg
Input terminal A1
Output terminal B1
Received data
kg
RNET
Sent data
key
AD-4402