AND Multi Function Weighing Indicator AD-4402 Instruction Manual page 67

Advise
Using the automatic switch of normal batch and loss-in-weigh.
Specify the output terminal for the hopper number in the material code on the I/O.
Specify the input terminal to change the mode on the I/O. [1n f-nn] [9]
Connect the output terminal to the input terminal.
Connect the output common terminal to the input common terminal.
Set the delay time above 0.1 second at [5qf-32]
Net weight
- Final value + Optional preliminary
- Final value + Preliminary
- Final value + Free fall
- Final value
or -Target weight
Tare command, Input
Material code, Input
Medium flow, Output
Dribble flow, Output
5qf-33
Full flow comparison interrupt timer
5qf-34
Medium flow comparison interrupt timer
5qf-35
Dribble flow comparison interrupt timer
Start command, Input
5qf-37
Batch finish, Output
AD-4402
Displayed value
Full value
0
Full flow, Output
If this command is
used, total and
comparison can be
used.
Eval delay timer
Stable, Output
Over, Output
OK, Output
Under, Output
Batch start delay timer
Gross weight
Full
Zero band
Optional preliminary
The active code is
only read at each
start. And keep it.
5qf-43
Batch finish output
on
Page 65
Final value
Preliminary
Free fall
Waiting timer
and stable.
Compari s on
Set the condition
at 5qf-13
Select a mode
at 5qf-05
.