Show Fdb - D-Link DGS-3100 SERIES Cli Manual

show fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display unicast MAC address table:
Mode : Static
Total Entries : 1
DGS3100#
To display the current unicast MAC address forwarding database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
The show fdb command displays the current contents of the
Switch's forwarding database.
<port> − The port number corresponding to the MAC destination
address. The Switch always forwards traffic to the specified device
through this port.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address entry in the forwarding table.
static − Specifies that static MAC address entries are to be
displayed.
aging_time − Displays the aging time for the MAC address
forwarding database.
None.
DGS3100# show fdb
Unicast MAC Address Ageing Time = 300
VID VLAN Name MAC Address
---- ----------------- -------------------------
1 default 00-00-39-34-66-9A
1 default 00-00-51-43-70-00
1 default 00-00-5E-00-01-01
1 default 00-00-74-60-72-2D
1 default 00-00-81-05-00-80
1 default 00-00-81-05-02-00
1 default 00-00-81-48-70-01
1 default 00-00-E2-4F-57-03
1 default 00-00-E2-61-53-18
1 default 00-00-E2-6B-BC-F6 10
1 default 00-00-E2-7F-6B-53 10
1 default 00-00-E2-82-7D-90 10
1 default 00-00-F8-7C-1C-29 10
1 default 00-01-02-03-04-00
1 default 00-01-02-03-04-05
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Port Type
------ ----------------
10 Dynamic
10 Dynamic
10 Dynamic
10 Dynamic
10 Dynamic
10 Dynamic
10 Dynamic
10 Dynamic
10 Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
CPU Self
10 Dynamic
82