Clean Transunit; Toner Refresh; Init Print Meter; Reset Transunit - Fuji Xerox DocuPrint P365 d User Manual

• Clean TransUnit

Purpose:
To clean the transfer unit.

• Toner Refresh

Purpose:
To clean the toner in a drum cartridge (and supply new toner from toner cartridge).
NOTE:
•
Toner Refresh feature uses the toner, and shorten the life of the toner cartridge and the drum cartridge.
• Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu parameters,
except the parameters for the network, are reset to their default values.
See also:
•
"Resetting to Factory Defaults" on page 138

• Init Print Meter

Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.

• Reset TransUnit

Purpose:
To initialize the transfer unit counter.

• Reset FusingUnit

Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.

• Clear JobHistory

Purpose:
To clear the job history of all finished jobs.

• Clear Storage

NOTE:
•
Clear Storage feature is available only when the optional 512MB memory is installed.
Purpose:
To clear all files stored as Secure Print and Sample Print in the RAM disk.
Values:
All Clear
Secure Document
Stored Document
128
Using the Operator Panel Menus
Deletes all files stored as Secure Print and Sample Print in the RAM disk.
Deletes all files stored as Secure Print in the RAM disk.
Deletes all files stored as Sample Print in the RAM disk.