Fault Time-Out; Job Time-Out; Alert Tone - Fuji Xerox DocuPrint M205 b User Manual

• Fault Time-Out

Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The print job is
canceled if it times out.
Values:
Off
On*

• Job Time-Out

Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is
canceled if it times out.
Values:
Off
On

• Alert Tone

Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message
appears.
Values:
Panel Select Tone Off*
Panel Alert Tone
Auto Clear Alert
Job Tone
161 Using the Operator Panel Menus and Keypad
Disables the fault time-out.
60sec* Specifies the time taken by the printer before it cancels for jobs
that stop abnormally.
3-300sec
Disables the job time-out.
30sec* Specifies the amount of time that the printer waits for data to
arrive from the computer.
5-300sec
Does not emit a tone when the operator panel input is correct.
Low Emits a tone at the specified volume when the operator panel
input is correct.
Medium
High
Off* Does not emit a tone when the operator panel input is
incorrect.
Low Emits a tone at the specified volume when the operator panel
input is incorrect.
Medium
High
Off* Does not emit a tone before the printer performs auto clear.
Low Emits a tone at the specified volume 5 seconds before the
printer performs auto clear.
Medium
High
Off Does not emit a tone when a job is complete.
Low Emits a tone at the specified volume when a job is complete.
Medium*
High