Sending A Fax Using Speed Dial; Group Dialing; See Also - Fuji Xerox DocuPrint CM405 df User Manual

 Sending a Fax Using Speed Dial
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.

See also:

• "Loading an Original Document" on page 253
2
Press the (Services) button.
3
Select Fax and then select
4
Enter the speed dial number between 001 and 200 using the number pad, and then select
5
Adjust the document resolution to suit your fax needs.
See also:
• "Adjusting the Document Resolution" on page 255
• "Adjusting the Document Contrast" on page 255
6
Press the (Start) button.
The document scans into the memory.
When the document is placed on the document glass, the display prompts you for another page. If you want to
place a new document, replace the document with a new document, and then press the
When you have finished loading documents, select Send Now.
The fax number stored in the speed dial location is automatically dialed. The document is sent when the remote
fax machine answers.
NOTE:
• Using the asterisk (*) in the first digit, you can send a document to multiple locations. For example, if you enter 00*, you
can send a document to the locations registered between 001 and 009.
 Group Dialing
If you frequently send the same document to several destinations, you can create a group of these destinations and
set them under a one-digit group dial location. This enables you to use a group dial number setting to send the same
document to all the destinations in the group.
NOTE:
• You cannot include one group dial number within another group dial number.
266
Faxing
button.
button.
(Start) button.