Update Firmware; System Utility Menu Descriptions - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual
6.

SYSTEM UTILITY MENU DESCRIPTIONS

Use the
S U
YSTEM TILITY

Update Firmware

Write security: 1; Read security: 5
Updates firmware when ATLAS 800 Series enhancements are released. Two transfer methods are available
for use in updating any modules that contain Flash memory—including the ATLAS 800 Series system
controller. The first transfer method uses the ATLAS 800 Series serial Admin port of the system controller
and XMODEM protocol. The second transfer method uses the ATLAS 800 Series built-in Ethernet port of
the system controller and Trivial File Transfer Protocol (TFTP). For more details on updating firmware,
please refer to DLP-6, Updating ATLAS Firmware using TFTP and
XMODEM.
Module Slot
Module Type
Transfer Method
TFTP Server IP
Address
61200780L1-1C
menu to view and set the system parameters shown in Figure 6.
Figure 6. System Utility Menu
Displays the slot you selected for firmware updating. When this option first
appears,
N S
ONE ELECTED
press <Enter>, a dialog box opens, allowing you to select various slots or
.
M T
ODULES OF A YPE
Reflects the module type selected in
upgradable modules.
Lists the two transfer methods for updating firmware after selecting a module
slot: XMODEM and TFTP
communications program that supports XMODEM uploads to the terminal
interface. TFTP transfers files by specifying an appropriate server address and
filename.
(Available for TFTP transfers only). Configures the IP address of the TFTP
Server on which the update file resides. The ATLAS 800 Series uses this field to
locate the network server on which the update file resides.
© 2004 ADTRAN, Inc.
System Utility Menu Descriptions
DLP-7, Updating ATLAS Firmware using
displays. When you move the cursor to this field and
M S
ODULE LOT
. XMODEM transfers files by connecting to a
Update Firmware
A
. The selections only include
LL
94