ADTRAN ATLAS 800 SERIES System Manual page 314

ATLAS 800 Series System Manual
Source ID
Pkt Voice: User Term - Ifce Config
Write security: 3; Read security: 5
This menu allows the user to define option parameters for ports configured as user packet voice endpoints.
Specifies the configuration parameters for the endpoint.
DLCI
Voice Port
Conflict Report
Voice Compression
Silence Suppression
Signaling Method
61200780L1-1C
Simplifies the creation of a dial plan in applications where the criterion for
switching calls to a certain endpoint is a function of which endpoint originated
the call.
• . Zero is the default ID for all endpoints and accept
D = 0
EFAULT VALUE
numbers. With default values, all calls are routed based only on the dialed
number.
• Multiple endpoints can have the same
• When creating the
C
dialed number or range of dialed numbers to accept.
Selects the appropriate DLCI for this dial plan entry.
Identifies the voice port address of the remote unit. FSU 5622s support ports 1
and 2. A remote ATLAS supports ports 1 through 255.
Describes existing conflicts. Potential problems include DLCI unavailable or
Voice port already in use.
Selects the voice compression algorithm used by this endpoint. ADTRAN FSU
5622 and Express 5200 Series FRADs use CCITT
kbps. The Express 5200 Series FRADs also support the proprietary
lgorithm at 6.4 kbps. Both endpoints must agree about the compression
A
algorithm choice.
Reduces the total system bandwidth load by preventing ATLAS from sending
frames containing a special silence code during periods of silence. Both
endpoints must agree to use silence suppression. By default, silence suppression
is D . To prohibit silence frames from transmitting and to decrease the
ISABLED
total system bandwidth,
Selects the type of signaling that the remote port is configured to expect.
Available options include the following:
.
S
TART
© 2004 ADTRAN, Inc.
Pkt Voice: User Term - Ifce Config
S
OURCE
list, specify a
A
ALL CCEPT
this feature.
E
NABLE
E&M I
MMEDIATE
Dial Plan
ID .
(s) as well as a
S ID
OURCE
compression at 6.3
G.723.1
N
ETCODER
, E&M W , and L
INK OOP
314