Octal Bri S/T Option Module - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual

OCTAL BRI S/T OPTION MODULE

The ATLAS 800 Series system controller automatically detects the presence of the Octal BRI S/T Option
Module (P/N 1200343L1) when it is installed in the system (listed as
Octal BRI S/T Option Module via the terminal menu, use the arrow keys to scroll to the
and press <Enter> to access the module choices. The following menu tree shows the hierarchy of the
menus discussed in this section.
Info
Part Number
Serial Number
Board Revision
Info
Write security: 5; Read security: 5
Provides information about the module part number, serial number and assembly revision.
Part Number
Serial Number
Board Revision
Alarms
Write security: 5; Read security: 5
Displays the alarm status for the selected Octal BRI S/T Option Module.
Prt
Alarms
Alarm
L1 Down
Channel
61200780L1-1C
Alarms Channel Usage
Prt Prt
Alarms Cha
Channel
Read security: 5
Displays the part number of the module. (Read-only.)
Read security: 5
Displays the serial number of the module. (Read-only.)
Read security: 5
Displays the board revision of the installed module. (Read-only.)
Indicates the port number.
Displays the current alarm status of each Octal BRI S/T interface.
Description
A layer one alarm is indicated by an asterisk (*) when the Octal BRI S/T
physical layer is not active. An L1 alarm is present when problems are detected
with the endpoint or a cabling problem.
Displays the alarm status of the D-channel alarm. A hyphen (–) indicates no
active channel alarm and D indicates an active D channel alarm.
© 2004 ADTRAN, Inc.
Octal BRI S/T Option Module
). To see the menus for the
ST-BRI
Configuration Test
Prt Prt
Port Name Local Loopback
Remote Loopback
Info
menu
M
ODULES
137