ADTRAN ATLAS 800 SERIES System Manual page 244

ATLAS 800 Series System Manual
RIP
Submenu
1
Mode
2
Protocol
Method
Updates
Authentication
Redistribute Default
Gateway
RIP/M
1 If
RIP V2
2 If
61200780L1-1C
Configures routing information protocol (RIP) on this interface.
Description
Allows RIP to be enabled or disabled on a per-interface basis, as follows:
RIP advertisements are periodically transmitted, but are not
Tx Only
listened to on this virtual circuit.
Rx Only RIP advertisements are not transmitted on this virtual circuit, but
they are listened to.
RIP advertisements are periodically transmitted and are listened
Tx and Rx
to on this virtual circuit.
Sets the version of RIP being used on this interface. The options are
. If is used, a new menu,
RIP V2 RIP V2
Defines the method used to send RIP route advertisements, as follows:
All routes in the router table are advertised through this interface
None
with no modification of the routing metric.
Only advertises routes not learned through this interface.
Split Horizon
Poison
All routes are advertised, but the routes learned through this
Reverse
interface are "poisoned" with an infinite route metric.
Defines when RIP advertisements are transmitted.
RIP advertisements are periodically transmitted.
Periodic
RIP advertisements are transmitted only when new routes are
Triggered
learned, and learned routes do not age.
Defines the secret used to advertise routes when using RIP V2.
Enables or disables the transmission of the Default Gateway to be sent with RIP
on a per interface basis.
P , M
is off,
ODE ROTOCOL ETHOD
is used, a user-defined secret may have to be created.
© 2004 ADTRAN, Inc.
A
UTHENTICATION
, U
and will not be visible.
PDATE
Router (IP)
Interfaces
RIP V1 and
, opens.
244