Nxt1 Hssi Option Module - ADTRAN ATLAS 800 SERIES System Manual

ATLAS 800 Series System Manual

NXT1 HSSI OPTION MODULE

The NxT1 HSSI/V.35 Module (P/N 1200771L1) system controller automatically detects the presence of
the NxT1 HSSI Option Module when it is installed in the system (listed as
for the NxT1 HSSI Option Module via the terminal menu, use the arrow keys to scroll to the
menu and press <Enter> to access the module choices. V.35 is available when using the optional adapter
cable (ADTRAN P/N 3125I081). The following menu tree shows the hierarchy of the menus discussed in
(
this section. Some of the following menus do not apply when configured for V.35 mode.)
Info T1 Enable
Part Number
Serial Number
Board Revision
Firmware Revision
Info
Read security: 5
Provides information about the module part number, serial number, and board revision.
Part Number
Serial Number
Board Revision
Firmware Revision
T1 Enable
Write Security: 3; Read Security: 5
Configures the NxT1 HSSI Option Module to activate the module's four built-in T1 interfaces. When
configuring the module to use more than four T1s from other installed T1/T3 modules, set this field to
.
D
ISABLED
61200780L1-1C
T1 Menus
Alarm Status
Performance (Curr, 15 min, 24 hr)
Configuration
Test
Displays the part number of the module.
Displays the serial number of the module.
Displays the board revision of the installed module.
Displays the firmware revision of the installed module.
The NxT1 HSSI/V.35 Module's four built-in T1 interfaces are activated collectively as a
bundle. Setting the T1 E
NABLE
built-in T1 ports to the HSSI interface. Setting the T1 E
requires ALL of the T1s mapped to the HSSI interface to be from other installed T1/T3
modules.
© 2004 ADTRAN, Inc.
N T1 HSSI
X
IMUX Menus
Status
Port Status
Config
Test
Port Test
menu to E
allows you to map any/all of the
NABLED
NABLE
NxT1 HSSI Option Module
Info
). To see the menus
M
ODULES
HSSI/V.35 Menus
Status
Config
Test
menu to D
ISABLED
167