Dlp-5 User Access And Password Security Levels - ADTRAN ATLAS 800 SERIES System Manual

DLP-5 User Access and Password Security Levels

Introduction
This procedure details the steps for adding and removing user profiles and for assigning password security
levels in the ATLAS.
All menus in the ATLAS are protected by passwords of varying security levels. The ATLAS System
Administrator controls which users can access (to view or change) menus. In addition, the System
Administrator can assign multiple passwords for the same access level. This way, users with the same
access privileges can have individual passwords.
Tools and Materials Required
VT100 terminal or PC with VT100 terminal emulation software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling modules,
wear an antistatic discharge wrist strap to prevent damage to electronic components. Place
modules in antistatic packing material when transporting or storing. When working on
modules, always place them on an approved antistatic mat that is electrically grounded.
Modifying User Access and Passwords
Connecting to the ATLAS
If you are not already connected to the ATLAS, follow the procedure in DLP-1, Connecting the Terminal
or PC to the ADMIN or CRAFT Port.
If the ATLAS is part of a management cluster connected to the local network, you may use a PC connected
to the network to Telnet into the unit. Use the procedures in DLP-3, Setting IP Parameters for the
ATLAS 800 Series System, on page 322 to connect to the 10/100 B
1. Login to the unit using the read-write password (see DLP-2, System Login and Menu Access, on
page 319 for details).
2. Go to the S
YSTEM
61200780L1-1C
C menu, select A
ONFIG
© 2004 ADTRAN, Inc.
ASE
P , and press <Enter>.
CCESS ASSWORDS
T interface.
327