ADTRAN ATLAS 800 SERIES System Manual page 181

ATLAS 800 Series System Manual
Status
Options
N/A
Available
Pending
Busy
Testing
Failed
Reloaded
Algorithm
Options
N/A
G.723.1
Netcoder
Silence
Connection
61200780L1-1C
Read security: 5
Indicates the condition of the individual packet voice device. This field may
display the following:
Description
This device is not populated on the selected VCOM Resource Module.
This resource is available for voice compression and functioning properly. If a
VCOM-8 Option Module is installed, 8 voice compression resources will be
and the rest will display
A
VAILABLE
VCOM-16, 24, and 32 Option Modules.
This resource is currently changing state.
This resource is currently in use.
This resource is currently being tested and is not available for use.
This resource has failed testing and is not available for use.
This resource was reinitialized after excessive errors.
Read security: 5
Denotes the voice compression algorithm being used by the packet voice
device. Any packet voice device can use any available compression algorithm.
When ATLAS 800 Series chooses a packet voice device for a particular call, the
voice compression algorithm is set to match the dial plan endpoint
configuration. Refer to the Frame Relay menu section of this manual for more
information.
Description
This device has not been assigned a voice compression algorithm.
CCITT G.723.1 compression; 6.3 kbps bandwidth.
Proprietary NETCODER compression; 6.4 kbps bandwidth.
Voice endpoints continue to originate frame relay traffic during periods of
relative silence. The ATLAS 800 Series expects to receive such silence frames;
therefore, silence compression is
can be configured so that no silence frames are transmitted during periods of
relative silence. For compatibility with these devices, the ATLAS 800 Series
can be configured to expect that silence suppression is
relay traffic is generated during periods of silence. Both voice endpoints must
agree on the silence suppression setting.
Read security: 5
Helps identify a suspect packet voice device if a particular call reports poor
quality. The displayed packet identifier and the dial plan endpoint identify the
call using this packet voice device.
© 2004 ADTRAN, Inc.
. The same principle applies to the
N/A
by default. Some voice endpoints
D
ISABLED
E
NABLED
VCOM Option Module
Status
; thus, no frame
181