ADTRAN ATLAS 800 SERIES System Manual page 223

ATLAS 800 Series System Manual
Performance Description (Continued)
Submenus
Link Stats - TBOP Displays Layer 2 performance statistics. The statistics fields for TBOP reflect the
total count since last cleared.
Tx Packets
Rx Packets
Clear Counters
Link Stats - PPP
Displays Layer 2 performance statistics. The statistics fields for PPP reflect the total
count since last cleared. The available statistic information is discussed below.
LCP State
IPCP
Tx Packets
Rx Packets
Clear Counters
Sublink Stats - Displays Frame Relay performance statistics for supported packet endpoint
Frame Relay
sublinks. These statistic fields reflect the total count since cleared.
not applicable for PPP or TBOP
Name
DLCI
State
61200780L1-1C
Total number of HDLC packets transmitted through this packet
endpoint.
Total number of HDLC packets received through this packet
endpoint.
Clears all values in this submenu.
Displays the current state of the LCP negotiations.
Displays the UP if PPP IP control has successfully negotiated.
Number of packets transmitted over this link.
Number of packets received over this link.
Resets the Tx and Rx packet counts.
.
User-defined name of a sublink (PVC).
Local address for each PVC as assigned by the carrier.
Indicates if this particular sublink (PVC) has been defined as active
by a full status poll, and also indicates if the PVC is in backup
mode. Possibilities include
Active
PVC is active.
Inactive
PVC is inactive.
Active/BU
PVC is active, but in backup mode.
Inactive/BU
PVC is inactive and in backup mode.
© 2004 ADTRAN, Inc.
Packet Manager
Packet Endpnts
These settings are
223